Publicidad
Enlaces rápidos
Warranty Information
This product has a limited 1 year warranty in North America and Australia.
For information on warranty periods in other regions, please contact your reseller or SilverStone authorized distributor.
本产品自购买之日起，于中国地区（不包含澳门，香港特别行政区）享有一年有限责任保固（部分产品为二年，三年或五年）。
详细保固年限请参照官方网站 https://silverstonetek.com.cn/ 公布之产品型号为依据。
Warranty terms & conditions
1. Product component defects or damages resulted from defective production is covered under warranty.
Defects or damages with the following conditions will be fixed or replaced under SilverStone Technology's jurisdiction.
a) Usage in accordance with instructions provided in this manual, with no misuse, overuse, or other inappropriate actions.
b) Damage not caused by natural disaster (thunder, fire, earthquake, flood, salt, wind, insect, animals, etc...)
c) Product is not disassembled, modified, or fixed. Components not disassembled or replaced.
d) Warranty mark/stickers are not removed or broken.
Loss or damages resulted from conditions other than ones listed above are not covered under warranty.
2. Under warranty, SilverStone Technology's maximum liability is limited to the current market value for the product (depreciated value, excluding
shipping, handling, and other fees). SilverStone Technology is not responsible for other damages or loss associated with the use of product.
3. Under warranty, SilverStone Technology is obligated to repair or replace its defective products. Under no circumstances will SilverStone
Technology be liable for damages in connection with the sale, purchase, or use including but not limited to loss of data, loss of business, loss of
profits, loss of use of the product or incidental or consequential damage whether or not foreseeable and whether or not based on breach of warranty,
contract or negligence, even if SilverStone Technology has been advised of the possibility of such damages.
4. Warranty covers only the original purchaser through authorized SilverStone distributors and resellers and is not transferable to a second hand
purchaser.
5. You must provide sales receipt or invoice with clear indication of purchase date to determine warranty eligibility.
6. If a problem develops during the warranty period, please contact your retailer/reseller/SilverStone authorized distributors or SilverStone
http://www.silverstonetek.com.
Please note that: (i) You must provide proof of original purchase of the product by a dated itemized receipt; (ii) You shall bear the cost of shipping
(or otherwise transporting) the product to SilverStone authorized distributors. SilverStone authorized distributors will bear the cost of shipping
(or otherwise transporting) the product back to you after completing the warranty service; (iii) Before you send the product, you must be issued a
Return Merchandise Authorization ("RMA") number from SilverStone. Updated warranty information will be posted on SilverStone's official website.
Please visit http://www.silverstonetek.com for the latest updates.
Additional info & contacts
For North America (usasupport@silverstonetek.com)
SilverStone Technology in North America may repair or replace defective product with refurbished product that is not new but has been functionally tested.
Replacement product will be warranted for remainder of the warranty period or thirty days, whichever is longer. All products should be sent
back to the place of purchase if it is within 30 days of purchase, after 30 days, customers need to initiate RMA procedure with SilverStone Technology
in USA by first downloading the "USA RMA form for end-users" form from the below link and follow its instructions.
http://silverstonetek.com/contactus.php
For Australia only (support@silverstonetek.com)
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Please refer to above "Warranty terms & conditions" for further warranty details.
SilverStone Technology Co., Ltd. 12F No. 168 Jiankang Rd., Zhonghe Dist., New Taipei City 235 Taiwan R.O.C. + 886-2-8228-1238
(standard international call charges apply)
For Europe (support.eu@silverstonetek.de)
For China (support@silverstonetek.com.cn)
For all other regions (support@silverstonetek.com)
电机组件
X
O
O
O
O
金属结构件
O
O
O
O
O
塑胶结构件
O
O
O
O
O
线缆/ 连接器
O
O
O
O
O
介质/其它
O
O
O
O
O
包装材料
O
O
O
O
O
辅助材
O
O
O
O
O
本表格依据SJ/T 11364的规定编制
○：表示该有毒有害物质在该部件
所有均质材料中的含量均在GB
/T 26572 规定的限量要求以下。
×：表示该有毒有害物质至少在该部
件的某一均质材料中的含量超出
GB/T 26572 规定的限量要求。
O
O
O
O
O
O
O
2018
NO.G11235700
Nitrogon Series
NT08-115X
Superior low-profile thermal solution for
Intel LGA1150/1151/1155/1156
65w
SPECIAL FEATURES
▓ Supports Intel LGA1150/1151/1155/1156 processors
▓ Designed for low-profile systems at 48mm tall
▓ Large custom 92mm PWM fan for excellent cooling and low noise
▓ True solid copper contact base enables heat dissipation up to 95W
▓ Copper center and base with extruded aluminum fins
▓ Easy to install
INTRODUCTION
SilverStone Technology's Nitrogon NT08-115X is a low-profile CPU cooler designed for space limited applications
that utilizes LGA1150/1151/1155/1156 platforms. It has a true, solid copper center and base with extruded aluminum
fins for superior thermal conductivity for up to 95W, a figure that rivals many larger and original coolers. The custom
92mm PWM fan was designed with fan blades to achieve the highest air pressure possible while maintaining an
acoustic profile that is rare for cooler of this size. At a total height of 48mm tall, the NT08-115X is an excellent
upgrade for any low-profile system on LGA1150/1151/1155/1156 platforms.
Install included back-plate onto
Установите прилагаемую установочную
the backside of the motherboard.
панель на задней части системной платы.
Installieren Sie die mitgelieferte
請將所附背板安裝於主機板背面。
Rückplatte an der Rückseite des
Motherboards.
Installez la plaque arrière sur la face
请将所附背板安装于主机板背面。
arrière de la carte mère.
Instale la placa trasera incluida en la
付属のバックプレートをマザーボードの裏側に取
parte trasera de la placa base.
り付けます。
제공된 백 플레이트를 메인보드의 뒷면에 설치합니다.
Installare la piastra posteriore fornita
in dotazione sul retro della scheda
madre.
95W
Publicidad
Manuales relacionados para SilverStone Nitrogon Serie
Resumen de contenidos para SilverStone Nitrogon Serie
- Página 1 Replacement product will be warranted for remainder of the warranty period or thirty days, whichever is longer. All products should be sent back to the place of purchase if it is within 30 days of purchase, after 30 days, customers need to initiate RMA procedure with SilverStone Technology in USA by first downloading the “USA RMA form for end-users”...
- Página 2 Removal Guide Apply included heatsink compound on you Равномерно нанесите прилагаемую термопасту Remove the CPU fan cable from the Отсоедините кабель вентилятора процессора CPU evenly. на процессор. motherboard fan header. от разъема вентилятора системной платы. 請將散熱膏均勻地塗抹在CPU上。 Tragen Sie die mitgelieferte Wärmeleitpaste Entfernen Sie das CPU-Lüfterkabel 將CPU風扇的連接線從主機板風扇接頭移除。...