Programme Selection And Special Functions - Hoover DDY 65540FAPM Instrucciones Para El Uso

PROGRAMME SELECTION
AND SPECIAL FUNCTIONS
(Use in conjunction with programme guide)
IMPORTANT
The dishwasher has two very practical
functions:
- the "recommended" programme
(which is set in the factory and is
ideal for full-load daily use) for quick
and accurate selection;
- the memory function which saves
the last programme used, so that if
you regularly use the same washing
cycle, you do not have to re-set the
programme every time, thereby
saving time and effort.
"ACTION PRO" button
This button allows you to change the wash
intensity, according to how dirty your
dishes are, by adjusting the wash time and
temperature.
The combination of the button with the 4
main wash programmes enables to have 8
additional wash cycles (achieving a total of
12 programmes of washing).
By pressing the "ACTION PRO" button
once (indicator light
wash cycle will be increased and will enable
the wash action of the third cleaning arm,
positioned at the bottom of the dishwasher
("POWER WASH").
This function allows cleaning of heavily
soiled tableware or cookware, by placing
them directly in the area of the basket above
the "POWER WASH".
) the intensity of the
By pressing the "ACTION PRO"
twice (indicator light
wash cycle will be decreased, reducing the
wash length time.
IMPORTANT
When the dishwasher is switched on,
the last used setting will be indicated.
Programme settings
Open the door and place the dirty dishes
inside the appliance.
Press the "ON/OFF" button
The display will show either the
"recommended" programme, or the
last programme used.
To set another programme, press the
"PROGRAMME SELECTION" button.
If you wish, press the "ACTION PRO"
button.
If you wish to select an option, press the
corresponding button (the indicator light
will turn on).
Press the "START" button.
The length of the program will be shown on
the display
minutes [I.e: 1 h (1 hour) / 25 (25 minutes)].
When the door is shut, after an audible
signal has sounded, the programme will
start automatically. The display will show
the time remaining to the end of the cycle.
13
) the intensity of the
.
alternating hours
button
with