VQT5E43_ENG_SPA.book 8 ページ 2013年12月25日 水曜日 午後7時41分
∫ Attaching the Lens Hood (Supplied Accessory)
≥ Before attaching the lens hood, loosen the lens hood screw.
1 Insert the lens hood until it stops.
2 Rotate the lens hood screw in the direction of
the arrow to fasten the lens hood securely.
≥ When using the lens, check if the lens hood screw
has become loose.
∫ Temporarily Storing the Lens Hood
1 Rotate the lens hood screw in the direction of the
arrow to loosen it, and remove the lens hood.
2 Turn the lens hood around so that it faces the
opposite direction, and insert it until it stops.