Tripp-Lite P130-000-AUDIO Manual Del Propietário página 3

Installation
Note: Make sure all devices you are connecting are powered off prior to installation.
1. Optional: Mount the unit to a wall or other surface using the included mounting
hardware.
2. Using an HDMI audio/video cable, connect the HDMI source to the HDMI input port
on the unit.
3. Using a second HDMI audio/video cable, connect an HDMI monitor to the HDMI
output port on the unit.
4. Connect the unit to a set of speakers, an audio receiver or other audio system
using the 3.5 mm stereo, TOSLINK or RCA digital outputs.
5. Connect the included external power supply to the unit and plug it into a Tripp Lite
Surge Protector, Power Distribution Unit (PDU) or Uninterruptible Power Supply
(UPS). The unit's red Power LED will illuminate to indicate it is receiving power.
6. Turn on the power to the connected devices. The red Power LED will change to blue
to indicate the unit is transmitting video and audio from the source to the display
and sound system.
7. To switch between 2-channel stereo and 5.1-channel surround sound, press the
button next to the HDMI input port. When 2-channel stereo audio is selected, the
LED next to the button will not illuminate. When 5.1-channel surround sound is
selected, the LED will illuminate red.
Specifications
Input Port
Output Ports
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
External Power Supply
Power Consumption
Max Video Resolutions
Unit Dimensions (H x W x D)
Unit Weight
17-03-303-9336C9.indb 3
HDMI (Female)
HDMI (Female), TOSLINK (Female), RCA (Female),
3.5 mm Stereo (Female)
32ºF to 158ºF / 0ºC to 70ºC
14ºF to 176ºF / -10ºC to 80ºC
10 to 85% RH, Non-Condensing
5 to 90% RH, Non-Condensing
Input: 100-240V, 50/60 Hz, 0.3A
Output: 5V, 1A
2.5W Max
3840 x 2160 @ 30 Hz / 1080p @ 60 Hz
0.83 x 2.8 x 2.4 in.
21 x 71 x 61 mm
0.3 lb
0.14 kg
3
3/23/2017 11:13:58 AM