Power Supply; Battery Operation - Grundig CDP 6600 Manual Del Usuario

POWER SUPPLY

Mains operation
(with mains adapter)
Notes:
Check if the mains voltage on the
7
mains adapter type plate corre-
sponds to your local mains supply.
The only way to disconnect the
7
device from the mains supply is to
unplug the adapter.
Only unplug the mains adapter
7
from the socket when you are not
using the device.
1
Plug the mains adapter cable into
»DC IN 4.5V
the
2 Plug the mains adapter into the
mains socket.
Caution:
Only operate the device with the
7
power supply provided.
_____________________________
« socket.
Ó

Battery operation

1
Pull out the mains adapter cable.
2
Open the lid of the battery compart-
ment on the bottom of the device.
3 Insert two batteries (2 x 1.5 V, LR6/
AM3/AA) in the battery compart-
ment observing the polarity.
4
Close the battery compartment
carefully.
Notes:
The device display tells you about
7
the state of the batteries. If »
flashes in the display, the batteries
are losing power.
The batteries are switched off
7
during mains operation. Remove
the batteries when they are flat or
when you know that the device
will not be used for a long period
of time. The manufacturer accepts
no liability for damage resulting
from leaking batteries.
Environmental note:
Batteries, including those which
7
contain no heavy metal, should
not be disposed of with house-
hold waste. Please dispose of
used batteries in an environmen-
tally responsible manner. Find out
about the legal regulations which
apply in your area.
«
ENGLISH 19