MSA GALLET fasit F2 X-TREM Manual Del Usuario página 10

ACCESSORIES
USING GOGGLES
Safety goggles are used for
protection of eyes against
dust and projections.
Donning with both hands.
INSTALLING GOGGLES
Attachment of the protection goggles
with plastic lace.
By changing the distance of the knots at
the rear of the helmet, you can alter the
string tension so the goggles are properly
positioned on your (the wearer's) face.
16
Attachment of the protection goggles
with black elastic strap.
The elastic strap includes an adjustable
buckle to set the pressure of the goggles
on the wearer's face, in order to optimize
comfort and protection.
FASIT Srl - Via Orsera 13/b - 34145 TRIESTE - ITALY - Tel +39 040 825604 -
USING SCBA MASKS
The helmet has two holes (a) to
accommodate the brackets from
breathing masks.
USING ACCESSORIES
The helmet has two holes (b) to accommodate
the standard MSA visor clamp or the
MSA SORDIN noise protection.
HELMET SERVICING
After each usage, store your helmet in a protective bag or in a closed storage area
(closet, locker) sheltered from humidity, light, exhaust gases. Do not store the helmet
under extreme conditions.
Avoid hitting or dropping the helmet, which could deteriorate the shields
(split/scratch), bending the shock-absorbing system, or deteriorating the helmet's
finish layer.
Precautions : Do not apply paint, stickers, hydrocarbons, or solvents to the helmet,
the shield and the neck curtain in order to prevent the risk of damaging the materials.
Cleaning : Use a clean soft lint-free cloth moistened in soapy water to clean the
helmet, the shield and the neck curtain. Wash the coating. Let dry normally. Do not
use a clothes dryer. To clean leather parts, apply some glycerine soap to a clean lint-
free cloth and then rub. It is not necessary to rinse the leather parts.
www.fasit.it - info@fasit.it
(a )
)
(b
MADE IN SWEDE
17
GB