Helmet Adjustment - MSA GALLET fasit F2 X-TREM Manual Del Usuario

According to the application types and versions, F2 X-TREM" responds to the various
standards : The EN 397, EN 12492, NIT 312 standards or EC marking.
MODÈLE NORMES
EN 397
GA32xx
- 30° / 440 V / LD
CASQUE D'ALPINISTE
GA33xx
EN 12492
EN 12 492
GA34xx
NIT 312 (France)
CE Marking
GA35xx Electrical protection
440 V
CE Marking
GA36xx Forest fire-fighting
and rescue operations
2 - Additional information
• To ensure a suitable protection, this helmet must be adapted or adjusted to the user's
(wearer's) head size.
• This helmet is capable of absorbing the energy released during a shock due to partial
damage or destruction ; even if the damage of the helmet is not visible, it is advisable
to systematically replace a helmet which has undergone a great shock.
• Users should also pay particular attention to the danger of modifying or eliminating one
or more of the helmet's original components unless such actions are recommended by
the helmet maker. Helmets should not be adapted under any circumstances for the
attachment of accessories if the helmet maker has not recommended such a process.
• Do not apply any paint, solvent, stickers or decals unless provided in the helmet
manufacturer instructions.
• To clean, service or disinfect the helmet, use only substances which cannot have any
adverse effect on the helmet and not reputed to have adverse effects on the wearer
when they are applied according to the helmet manufacturer information and instructions.
12
DESCRIPTIF
Meaning of optional
requirements for EN 397
- 30° : temperature during
performance tests,
shocks and
penetrations.
440 V : electrical protection
ensured by the helmet
LD : protection to side
deformation
Notified organization :
UTAC (0069)
Autodrome de Linas
MONTLHERY Cedex France
FASIT Srl - Via Orsera 13/b - 34145 TRIESTE - ITALY - Tel +39 040 825604 -
3 - Accessories
The F2 X-TREM" has arrangements allowing to adapt communication, lighting system,
neck protection, SCBA face piece, goggles, noise protection, protective grid or visors.

HELMET ADJUSTMENT

Ratchet adjustment
WEARER HEAD SIZE
Adjust the headband size by making the following
adjustments :
This headband covers 3 sizes : S, M, L.
This product is recommended for head sizes from
52 to 64 cm.
1. Adjust the size.
2. Quick adjustment (a) tighten (b) loosen
INTERNAL HEIGHT AND INCLINATION
Adjust the lining by using the front snaps (a) (2 positions) and the 2 self-gripping
clamps through the holes of the rear interface.
The helmet holder height is adjusted by sliding the 2 self-gripping clamps through the
holes of the rear interface.
Position 2
Position 1
(a)
www.fasit.it - info@fasit.it
GB
) )
(b (b
(a) (a)
13