Internet Connection - Sanyo VA-82LAN Manual De Instalación

Connection - 1

■ Internet connection

Connect the camera to a router or ADSL modem with LAN interface
using LAN cables.
When connecting to a router, use the straight type LAN cable.
When connecting to an ADSL modem or other devices, refer to the
instruction manual for the device.
To prevent
electromagnetic
interference:
✱1
✱1: Attach the white
round clamping core
✱2
(large) by winding
the cable around it
twice.
✱2: Attach the white
round clamping core
(small) by nipping
the cable with it.
Router or
ADSL modem
Internet
■ About the internet connection
Port forwarding must be set on two of the router ports (camera side).
For details on how to set port forwarding, please refer to your router's
instruction manual.
• Video port number
Conduct the following port forwarding settings with respect to the
router:
IP address on the LAN side: Camera IP address (default:
192.168.0.2)
Port number on the LAN side: Camera video port number
(default: 80)
Port number on the WAN side: Optional
For communication, use TCP/IP.
• Voice port number
Conduct the following port forwarding settings with respect to the
router:
IP address on the LAN side: Camera IP address (default:
192.168.0.2)
Port number on the LAN side: Camera voice port number
(default: 34341)
Port number on the WAN side: Camera voice port number
(default: 34341)
For communication, use UDP.
When installing multiple cameras on the LAN side, change the voice port
number for the second camera onwards accordingly (default: 34341),
and make the port forwarding setting for the corresponding router.
MEMO: When viewing video in H.264 format over the Internet, set the
communication protocol of H.264 to "HTTP". (See page 27 of
the INSTRUCTION MANUAL [VA-82LAN] contained in the
supplied CD-ROM.)
3