TRANSLATION OF THE ORIGINAL INSTRUCTIONS
CAUTION: BEFORE USING THE DEVICE READ THIS MANUAL CAREFULLY AND KEEP IT FOR FUTURE
REFERENCE.
ADDITIONAL SAFETY RULES
●
Before connecting the vacuum cleaner to a power network ensure the supply voltage matches the
voltage on the rating plate of the tool.
●
Connect the vacuum cleaner only to electrical system equipped with residual current circuit breaker
●
●
Keep the power cord of the device away from moving parts of other tools at all times.
●
To connect the vacuum cleaner and vacuum cleaner with receiver use appropriate power cord designed
for outdoors operation and appropriate capacity.
●
Protect power cord against spilled water, oil and other chemical substances.
●
Do not use the vacuum cleaner in environment with explosive vapours, gases and in proximity of
explosive materials.
●
or liquids, e.g. oils, solvents, petrol.
●
●
Do not operate with full tank or dust bag. Empty the tank and replace dust bag regularly.
●
Do not use the vacuum cleaner to clean fur on animals, clothes on persons, and drain water from
aquaria (risk for human and animal health).
●
Protect the vacuum cleaner from rain.
●
Do not expose the device to direct sunlight or other source of heat.
●
Do not bring the suction attachment of the vacuum cleaner close to objects, which may be caught by
sucked air (risk of damage of objects and the vacuum cleaner).
●
Do not open dirt container during operation of the vacuum cleaner.
●
If the power cord is damaged during operation, disconnect the power supply immediately.
TOUCH POWER CORD BEFORE DISCONNECTING THE POWER SUPPLY.
●
Remove plug from mains socket:
●
whenever you go away from the tool;
●
before checking, cleaning or repairing the tool.
●
Only authorized persons should repair the vacuum cleaner.
●
Use only spare parts recommended by the manufacturer.
Maintenance and storing
●
Keep all parts of the vacuum cleaner in good technical condition.
●
To keep the operation safe, replace worn out and damaged parts.
●
Keep the tool beyond reach of children.
Explanation of used symbols
1.
Warning, use precaution measures.
2.
Read instruction manual, observe warnings and safety conditions therein!
3.
WORKSHOP VACUUM CLEANER
59G607
DETAILED SAFETY REGULATIONS
12
DO NOT
6