Dismantling - Parkside PSTF 20 A1 Traducción Del Manual De Instrucciones Original

♦ Remove the spray nozzle
the holder
spray nozzle connector
♦ Turn on the spigot.
♦ After completing your work,
turn off the spigot.
PSTF 20 A1
from
and attach it to the
.

Dismantling

♦ Pull the spigot piece
the spigot adapter
♦ Unscrew the spigot piece
from the spigot and attach it
back onto the spigot adapter
♦ Remove the spray nozzle
from the garden pump sprayer
connector
spray nozzle
holder .
NOTICE
► Unroll the hose
so that you can empty it com-
pletely. Otherwise the hose
cannot be rolled up.
► Squeeze the water out of the
hose with your hands to
make it easier to roll up.
♦ Guide the hose
roll-up aid
guide and insert the spray
nozzle connector
holder .
♦ Wind up the hose
the hand crank
clockwise (see arrow on hose
reel ). The roll-up aid
vents the hose
♦ Place the spigot adapter
back in the holder
out of
.
and place the
back in the
all the way
onto the
through the hose
into the
by turning
counter-
pre-
from twisting.
.
│
GB 13
.
■