Chamberlain Smart Garage MYQ-G0301 Guia De Inicio Rapido

Connect the Smart Garage
Make sure the Wi-Fi ® Signal in the garage is strong and your mobile device is connected to your 2.4 GHz Wi-Fi network
Connect with Apple ® iOS
1. Download the MyQ ® App from the App Store
2. Plug in the Smart Garage Hub. The blue LED on the Smart Garage Hub
will blink, the Smart Garage Hub is now ready to be connected to your
network.
3. On your mobile device go to Settings, tap Wi-Fi, then tap the network
with the "MyQ" prefi x and tap Connect. Once connected, launch the
mobile device's web browser and go to setup.myqdevice.com.
4. Tap Start.
5. Tap your network from the available Wi-Fi networks list.
6. Enter the network password for the selected Wi-Fi network.
7. Tap Next. The Smart Garage Hub will connect to the selected Wi-Fi
network; this may take a few minutes.
8. Once the Smart Garage Hub is connected to your network a
Congratulations window will open and the LED on the Smart Garage
Hub will display solid Green. Tap Next to continue.
NOTE: Do not operate the garage door opener until installation has been
completed.
9. Launch the MyQ App, login, and tap the menu icon. From the side menu
tap Manage Places > tap + > tap your MyQ Place > tap Garage Door
Opener.
Having a problem?
If you are unable to connect the Smart Garage Hub to your network, erase the Wi-Fi settings and try again. If you are still unable to connect, reset the Smart
Garage Hub to factory default and try again.
Erase Wi-Fi settings
Erasing the Wi-Fi settings allows you to reset the Wi-Fi settings on the Smart Garage Hub.
1. The Green LED on the Smart Garage Hub MUST be on or blinking to erase the Wi-Fi settings.
2. Press and hold the settings button (gear) on the Smart Garage Hub until the blue LED blinks. The Wi-Fi is ready to be setup.
Factory Default
Setting the Smart Garage Hub back to factory default erases the Wi-Fi settings, door sensors, removes the device from the MyQ account, and erases any
remotes or keyless entries that have been programmed to it.
1. Press and hold the settings button (gear) on the Smart Garage Hub until the blue LED blinks then release.
2. While the blue LED on the Smart Garage Hub is blinking, press and hold the settings button (gear) again until the blue LED pauses, then blinks or beeps.
The Smart Garage Hub is set to factory default.
NOTE: If lights on hub are blinking blue and green, you will need to unplug the router to erase the Wi-Fi settings or set to factory default.
114A5134
Hub to Your Network
TM
Connect with Android
SM .
1. Download the MyQ App on Google Play.
2. Create or Log into your MyQ Account
3. Plug in the Smart Garage Hub. The blue LED on the Smart Garage Hub
will blink, the Smart Garage Hub is now ready to be connected to your
network
4. Launch the MyQ App. Tap Add a Device or tap the gear icon.
5. Search for the device with the "MyQ" prefi x under Discovered Devices.
6. When prompted tap your network.
7. When prompted enter your network password.
8. Verify the LED on the Smart Garage Hub has gone to solid Green.
NOTE: Do not operate the garage door opener until installation has been
completed.
9. Launch the MyQ App and tap the Menu icon. From the side menu tap
Manage Places > tap your Place > tap Add a Device > Garage Door
Opener.
©2017 The Chamberlain Group, Inc. All Rights Reserved. Chamberlain, the Chamberlain logo, MyQ
registered trademarks of The Chamberlain Group, Inc. Patents and patents pending. Apple is a trademark of Apple Inc., registered
in the U.S. and other countries. App Store is a service mark of Apple, Inc. Android and Google are trademarks of Google Inc.,
registered in the U.S. and other countries. Google Play and the Google Play logo are trademarks of Google Inc.
Wi-Fi ® is a registered trademark of Wi-Fi Alliance. All other trademarks are the property of their respective owners.
TM Mobile Device Alternate Connection Method for Android
1. Download the MyQ App on Google Play.
2. Plug in the Smart Garage Hub. The blue LED on the Smart Garage Hub
will blink, the Smart Garage Hub is now ready to be connected to your
network.
3. On your mobile device go to Settings, tap Wi-Fi, then tap the network
with the "MyQ" prefi x and tap Connect. Once connected, launch the
mobile device's web browser and go to setup.myqdevice.com.
4. Tap Start.
5. Tap your network from the available Wi-Fi networks list.
6. Enter the network password for the selected Wi-Fi network.
7. Tap Next. The Smart Garage Hub will connect to the selected Wi-Fi
network; this may take a few minutes.
8. Once the Smart Garage Hub is connected to your network a
Congratulations window will open and the LED on the Smart Garage
Hub will display solid Green. Tap Next to continue.
9. Create or Log into your MyQ Account
10 Launch the MyQ App, login, and tap the menu icon. From the side menu
tap Manage Places > tap + > tap your MyQ Place > tap Garage Door
Opener.
Gear Button
Smart Garage Hub
® and the MyQ ® logo are
TM