Connection Scheme - REV Ritter 0046880 Instrucciones De Montaje

GB
Installation instuction
1. Connection to a transformer 8V/1A ~ or battery operation
• Disconnect the bell transformer of the mains (only when operated
with the transformer)
• Remove the front cover
• Introduce cables and fix the lower part of the chime housing
• Connect the wires according to the drawing either as transformer
or battery operation.
• Insert 2 AA Mignon batteries or rechargeable batteries (always
necessary)
• Cover has to be put properly on the housing.
• Turn on the fuse again.
• Choose melody with button on the right of the terminals
• The live span of the battery is approx. 1 year
• Sound distortion and a low volume are signs that the battery is
weakening. In that case the battery has to be replaced.
Caution: The installation can only be done when the chime is not
connected. The relevant guidelines have to be followed.

2. Connection scheme:

230V~ power network
transformer
8V
bell button
230V~ power network
transformer
8V
bell button
6
8V chime
Terminal clip A
Terminal clip B
Terminal clip1
Terminal clip 2
AA
AA
2x"AA"
8V chime
Terminal clip A
Terminal clip B
Terminal clip1
Terminal clip 2
AA
AA
2x"AA"
chime
Terminal clip A
Terminal clip B
Terminal clip1
bell button
Terminal clip 2
2x"AA"
chime
Terminal clip A
Terminal clip B
Terminal clip1
Terminal clip 2
bell button
2x"AA"
AA
AA
AA
AA