Battery Replacement; Notes - Beta 1760 / IR800 Manual Del Usuario

Note: Measurement operations considerations
To correctly carry out measurement, grip the thermometer and point the infrared sensor towards
the object whose temperature is intended to be measured. The instrument is automatically capable
of compensating for temperature deviations owed to ambient temperature. Keep in mind that the
infrared.sensor.needs.a.certain.time.to.stabilize.in.temperature..Therefore,.if.it.is.necessary.to.
carry out measurements on areas where there is a heightened thermal amplitude, it is necessary
to wait for a few moments before beginning measurement.

BATTERY REPLACEMENT

1 When the battery discharge "
to replace it with a new 9V battery.
2 Open battery carrier cover, then take out the battery from instrument and replace with a new
9-Volt.battery...Finally.close.the.battery.carrier.cover.again....

NOTES:

• How it Works. Infrared thermometers measure the surface temperature of an object. The op-
tical devices of the instrument indicate the energy emitted, reflected, and transmitted that has
been.gathered.and.converged.on.the.sensor..The.electronic.circuits.transform.the.signals.into.
temperature reading values which are then displayed on the instrument. The laser, when present,
serves.only.for.the.pointing.phase.
" symbol appears on the thermometer display, it is necessary
7