How To Transport The Machine - Clarke American Sanders EZ-8 Manual Del Operador

ENGLISH
EN

How to Transport the Machine

Transporting the Machine With Limited
Cargo Area:
To transport the machine, follow this procedure:
1. Lower sanding drum with control lever. See figure
#1.
2. Slide collar beyond overlap of control link; remove
pin from notch. See figure #2.
3. Twist and remove handle pigtail from motor cord.
See figure #3.
4. Release handle latches and remove handle from
chassis. See figure # 2.
5. Remove dust pipe from chassis.
6. Lift chassis with transport handles and place in
cargo area. See figure # 4.
WARNING: Machine is heavy (95 lbs.). To
avoid injury or damage grasp
transport handles firmly; use
proper lifting technique.
7. Secure chassis to prevent movement in cargo
area. Place handle and dust pipe in cargo area.
Figure # 4
-6-
All manuals and user guides at all-guides.com
®
Clarke
American Sanders
Figure # 1
Figure # 2
Figure # 3
Operator's Manual (EN) - EZ-8 Sander