ASROCK Fatal1ty X79 Champion Serie Manual De Instrucciones página 21

Ocultar thumbs Ver también para Fatal1ty X79 Champion Serie:
Tabla de contenido

Publicidad

Installing an expansion card
Step 1.
Before installing an expansion card, please make sure that the power
supply is switched off or the power cord is unplugged. Please read the
documentation of the expansion card and make necessary hardware
settings for the card before you start the installation.
Step 2.
Remove the system unit cover (if your motherboard is already installed
in a chassis).
Step 3.
Remove the bracket facing the slot that you intend to use. Keep the
screws for later use.
Step 4.
Align the card connector with the slot and press firmly until the card is
completely seated on the slot.
Step 5.
Fasten the card to the chassis with screws.
Step 6.
Replace the system cover.
Fatal1ty X79 Champion Series Motherboard
21

Publicidad

Tabla de contenido
loading

Tabla de contenido