Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY GOGGLES PBKZ 1 A1
Intended use
The safety goggles are designed to serve as eye protection during manual
work.
The arms of the glasses are foldable and extendable.
The product complies with EN 166, protection class FT and optical class 1.
The sight glass type is clear.
The protection class FT means that the product offers high resistance to
impacts from particles at high speeds of 45 m/s at extreme temperatures.
If the symbols F, B and A do not apply to both the sight glass and the sight
glass support, the complete eye protector shall be assigned the lower level.
If mechanical protection at extreme temperatures is required, the eye
protection device must have the additional marking T (e.g. FT, BT, AT).
Otherwise, the eye protector may only be used at room temperature to
protect against high-speed particles.
For reasons of safety and approval (CE), no modification and/or alteration
to the product is allowed.
To ensure that the eye protection device is suitable for the application,
contact your health and safety officer.
No spare parts are available for the eye protection device.
Any other uses of the appliance is deemed to be improper and carries the
risk of serious personal injury.
The manufacturer accepts no responsibility for damage attributable to
misuse.
Package contents
1 pair of safety goggles
1 set of operating instructions
Technical specifications
Identification of the product:
Spectacle lens:
2C-1,2 KOMPERNASS 1 FT CE
2C-1,2:
Protection level for UV protection filter with im-
proved color recognition
KOMPERNASS:
Manufacturer Identification
1:
Optical class
FT:
Mechanical strength (45 m / s) at extreme temper-
atures (+ 55 ° C / -5 ° C)
CE:
CE mark
Frame:
KOMPERNASS 166 FT CE
KOMPERNASS:
Manufacturer Identification
166:
valid standard
FT:
Mechanical strength (45 m / s) at extreme temper-
atures (+ 55 ° C / -5 ° C)
CE:
CE mark
Expiration date:
This product does not have an expiration date.
The service life depends on the level of handling
care and on the conditions of use. Under normal
circumstances, the sight glasses should be replaced
every 6 months at the latest. However, damaged
sight glasses must be replaced immediately.
│
GB │ IE
■
4
Safety information
WARNING!
►
Read all safety warnings and all instructions.
Save all warnings and instructions for future reference .
■
The safety goggles and packaging material are not toys. Keep them out
of the hands of children.
■
Never leave the packaging material unattended. It could be dangerous
if children play with it.
■
Protect the safety goggles from extreme temperatures, direct sunlight,
shocks, high humidity, wetness, flammable gases, vapours and solvents.
■
Treat the safety goggles carefully. They can be damaged by bumps,
impacts or a fall from a low height.
■
Note that the safety goggles can transmit the energy of impacts from
high velocity particles (when worn over corrective glasses) and thus
represent a danger to the user.
■
Note that some materials may trigger allergic reactions upon contact
with sensitive skin.
Use, cleaning and storage
WARNING!
►
Check and clean the goggles before use. Scratched or damaged
protective glasses impair visibility and offer only a reduced protective
effect.
Safety goggles with scratched or damaged protective glasses should
be replaced immediately.
■
Adjust the extensible headband of the safety goggles to fit your head.
■
Ensure that they fit comfortably and securely.
■
When wearing the safety goggles, ensure that they fit comfortably.
■
Use a soft, damp and clean spectacle cleaning cloth to clean the safety
goggles. Never use petrol, solvents or cleansers which can damage
plastic.
■
To disinfect the safety goggles, use only cleaning agents that do not
contain solvents or aggressive substances.
■
Do not exert strong pressure on the surfaces, as this can cause scratches.
■
After use, store and transport the safety goggles in a clean, dry and
UV-proof environment, e.g. in a suitable spectacle case (not supplied).
Publicidad
Capítulos
Tabla de contenido
