Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
8. Open the ventilating windows and secure them
with the spacers.
9. Secure the outer tent
fastenings with the tent pegs
10. Now secure the outer tent
(pre-assembled)
6
Illustration F:
11. Open the entrance, unroll it and attach it with
the one fasteners.
12. Stretch the tent until taut and pull all of the
corners and guy ropes
Do not over-tighten the guy ropes
strength of the wind increases the attachment
point and seam of the tent might tear.
Inner tent (without using the outer tent):
Warning: The inner tent and the mesh do not show
a UV protection. Protect your skin. While using the
inner test alone without the outer tent, rains may get
in the inner tent through the mesh windows. Use the
inner tent only under by a shelter covered in warm,
dry conditions with fair weather.
Illustration G:
1. Place the inner tent
hooks for the poles
2. Run the two poles
3
into the hole of the hook on the inner tent one
after another and slide them through to the end.
Illustration H:
3. Push the pole
of the awning through the hooks
3
on the awning so that it extends evenly on both
sides of the hooks.
4. Set the tent
up and fix the poles to the plastic
2
cup of the floor fastenings.
Illustration I:
5. Run the fiberglass poles
and fix into the plastic cap on the both end of
the top of inner tent
6. And then tie up the poles
strings at the top of the inner tent
by tensioning the floor
1
.
5
with the guy rope
1
,
and the tent pegs
7
until they are tight.
6
. If the
6
flat on the ground. The
2
must be facing upwards.
3
with the metal end forward
through the hooks
4
.
2
,
tightly with the
3
4
.
2
Illustration J:
7. Fix one side of the inner tent
with the tent pegs
other end of the inner tent
in such a way that the tent is taut.
.
8. Secure the inner tent
5
floor fastenings with the tent pegs
Taking down the tent
Clean the tent both inside and outside before you
take the tent down. The tent must be dismantled
in the reverse order to the manner in which it has
been erected.
Packing the tent together
CAUTION! Please ensure that the tent is com-
pletely dry before you pack it together. Other-
wise this may result in stains and damage to the
fabric.
CAUTION! The tent pegs
vidual parts must be packed separately in the
bags provided. Otherwise the tent pegs
might damage the tent.
Always fold the tent together in such a way
that the floor of the tent is facing outwards.
Collect all of the parts together carefully before
you pack the tent. You should count the parts
in order to ensure that none of them have been
mislaid or lost.
After the tent has been rolled up, pack it care-
fully into the carrying bag.
Cleaning and care
CAUTION! Never wash the tent in a washing
machine. Otherwise the product may lose some
of its ability to keep out water.
CAUTION! Never use petrol, solvent or other
cleaning agents. Otherwise there is a danger
of damage to the product.
in the ground
2
. Then take hold of the
5
and pull it apart
2
by tensioning all the
2
.
5
and other indi-
5
5
GB/MT
15
Publicidad
Tabla de contenido
