Using The Food Processor Bowl - Ninja BN800EU Instrucciones

USING THE FOOD PROCESSOR BOWL

IMPORTANT: Review all warnings on
pages 4–7 before proceeding.
IMPORTANT: As a safety feature, if the
blade assembly is not fully seated, you
will not be able to install and lock the lid.
NOTE: Auto-IQ® programs have pauses
and changes in speed throughout
the cycle.
NOTE: DO NOT add ingredients before
completing installation of the blade
assembly.
NOTE: Please follow the same instructions
to install the Dough Blade Assembly.
1
Plug in motor base and place on a
clean, dry, level surface such as a
worktop or table.
2 Lower the Food Processor Bowl onto
the motor base and rotate clockwise
until it clicks into place.
60 ninjakitchen.eu
3 Exercising care, grasp the Chopping
Blade Assembly by the top of the shaft
and place it onto the drive gear inside
the bowl. Note that the Chopping
Blade Assembly will fit loosely onto
the drive gear.
4 Add ingredients to the bowl, making
sure not to exceed the MAX FILL line.
5 Place lid on the bowl, with black line on
tab aligned slightly to the right of tab
on front of bowl. Turn lid clockwise to
lock in place. When properly locked,
the white line on lid will line up with
the black line on bowl. Once the lid is
locked in place, press the Power button
to turn unit on. The available program
buttons will illuminate and the unit will
be ready for use.
6a If using an Auto-IQ® program, first select
the program that best suits your recipe.
The preset feature will automatically
stop the unit at the end of the program.
To stop the unit at any time, press the
currently active program again.
6b If using a manual program, select your
desired speed. Once the ingredients
have reached your desired consistency,
press the active button again, and wait
for the unit to come to a complete stop.
7 To remove the bowl from the motor
base, turn the bowl anti-clockwise and
then lift up.
8 Release the lid by twisting anti-clockwise
and lifting upwards from the motor base.
Ensure the blade is removed before
emptying the contents.
9 Turn the unit off by pressing the Power
button. Unplug the unit when finished.
Refer to the Care & Maintenance section
for cleaning and storage instructions.
61
ninjakitchen.eu