Handling And Operation; Setting The Date And Time Manually - Silvercrest SFPW 360 B1 Manual De Instrucciones

The room temperature is displayed to one decimal
place under the time . The preset temperature unit
is degrees Fahrenheit ( ) and can be changed to
degrees Celsius ( ) .

Handling and operation

Setting the date and time manually

If no button is pressed for around 20 seconds
during manual setting of the time, the device
exits setting mode. Any settings already made
will be saved.
In basic mode, press the SET button 8 for about
♦
3 seconds . The year flashes on the display .
Press the – /WEEK LANG button 5 or the
♦
+ /12/24 button 6 to set the desired value .
♦ Press the SET button 8 to confirm your entry .
The month display flashes on the display .
♦ Press the – /WEEK LANG button 5 or the
+ /12/24 button 6 to set the desired value .
♦ Press the SET button 8 to confirm your entry .
The day display flashes on the display .
♦ Press the – /WEEK LANG button 5 or the
+ /12/24 button 6 to set the desired value .
■ 14
_330014_SFPW360B1_LB9.indb 14
│
US - EN
SFPW 360 B1
03.09.19 12:2