Technical Data - HP Autozubehor HP20365 Manual Del Usuario

I.

Technical data:

Type
Nominal voltage
Power input
Rated torque
Polishing disc
Weight
Noise and vibration
A-rated sound pressure level
A-rated sound power level
Typical hand-arm vibration
Values determined as per EN 60 745-2-3 and EN 60 745-1.
Warning: The actual vibration emission value during use of the machine can vary from the value provided
in the user manual/by the manufacturer.
This can be due to the following factors that should be taken into account before and/or during use:
- Is the device used properly.
- Is the type of material being processed correct.
- Is the device in good working condition.
- Are the handles or optional vibration handles attached and fasted securely the machine frame.
If you experience an unpleasant feeling or discoloration of the skin on your hands while using the machine,
cease operation immediately. Take appropriately timed breaks while working. Failure to take appropriately
timed breaks from working may lead to hand-arm vibration syndrome (HAVS).
You should estimate the amount of strain resulting from use of the machine and take appropriately timed
breaks accordingly. This can significantly reduce the total amount of strain during the working period.
Minimize the risk that exposure to vibration poses. Care for this machine according to the instructions in
the user manual.
Avoid use of the machine at temperatures of t=10°C and lower. Make a work plan to minimize the amount
of strain you are exposed to via vibration.
A certain level of noise is unavoidable when using this device. Therefore, carry out noisy jobs during
approved hours. Observe statutory rest periods and reduce your working time to the absolute necessary.
For your own safety and that of persons in your vicinity, wear suitable hearing protection.
HP20365
230 V~, 50Hz
1500W
600-3000/min
0 Ø180mm
3,2 kg
L : 86 dB(A), K
pA pA
L : 97 dB(A), K
wA wA
a : 3.7 m/s², K : 1,5 m/s²
hp
ah,P with operation description "polishing"
3
: 3 dB
: 3 dB