NEO NL 660 Manual Del Usuario Y Garantía página 19

nl660 manual.qxd 10/02/2004
U s e r s M a n u a l
USING LEVEL WITH LEVELLING PLATFORM
This level can also be used with the levelling
platform for much broader applications such
as framing and aligning windows, installing
track lighting, and lining up bath and kitchen
cabinets.
The laser light can be used to pick up a single
point of reference and project a level hori-
zontal or vertical line accurate to +/-1/2" at 30'
across the work area in front of the tool.
The laser light will accurately mark horizontal
lines, vertical lines and right angles.
MOUNTING LEVEL TO LEVELLING PLAT-
FORM
1. Put the level on the levelling platform and
slide the front of the tool into and around
the alignment pin (Fig. 18).
NOTE: The levelling platform can also be used
attached to the tripod base to provide a
more stable, flat surface for levelling oper-
ations.
2. Place the level with platform on any flat
surface in the work area. Turn the three
black adjustment knobs to level. There are
two bubble levels on top of the tool to help
you level the tool (Fig. 19). Turn the level
"ON". DO NOT point the tool in the direc-
tion of your eyes or anyone else's eyes.
3. Align the laser line with your point of ref-
erence.
Fig. 18
05:04 p.m. Page 19
Fig. 19
USING LEVEL WITH TRIPOD BASE
(Fig. 20)
This level can also be used with the tripod
base. This provides even more flexibility in the
set up and use of the laser level.
The use of a tripod with this tool is ideal for
levelling kitchen cabinets, countertops, win-
dow framing, plate rails and more.
Fig. 20
Adjustment
knobs
Alignment pin
E n g l i s h
Vertical
Horizontal
Adjustment
Nivel
Plataforma
niveladora
Base trípode
rosca de
montaje
estándar
¼-20 UNC
knobs