Technical Characteristics - VENTILAIRSEC VMI PRESTIGE Manual De Instalación

2.2

Technical characteristics

2.2.1 Operation
▪
Single phase 230 VAC, 50 Hz
▪
Maximum output for Galbé, Cube and Compact model housings: 1140 W
▪
Maximum output for URBAN model housings: 1125 W
▪
Maximum output for MAXI model housing: 2220 W
▪
Electrical protection index for Galbé, Cube and MAXI housings: IPX2
▪
Electrical protection index for URBAN housings: IP20
▪
Ambient operating temperature: -5°C/60°C
▪
Remote Control - VMI® Communication Radio Frequency: 868 MHz
2.2.2 Structure
▪
Weight: 11 kg (Galbé and Compact models) 10 kg (Cube model) 11.9 kg (Maxi model) 8.2 kg
(Urban)
▪
Housing electrolytic zinc coated steel 1.5 mm or 1.2 mm thick - epoxy powder-coated paint
RAL9010
▪
Cover: ABS AE UL94V0 3 mm thick 3 mm
▪
Urban:
o Housing and wall mount: electrolytic zinc coated sheet, th. 0.6 mm or 1 mm or 2 mm
– epoxy powder-coated paint RAL 9003
o Structure: Aluzinc sheet, 1.2 mm or 1 mm
o Side with the Drawer, Power access hatch, Trim and Front panel: ABS/PC UL94V0
o Internal structure: PPE 60 g/l
▪
Grade F7 and G4 filters
▪
2 connection pieces for 160 mm diameter ducts (except Urban)
2.2.3 Performance
▪
Air preheating:
o VMI® unit: X, 12°C, 15°C, 18°C (manual programming)
o Hydro'R option: Up to 28°C (manual programming)
o Solar'R option: Up to 45°C depending on needs (automatic programming)
▪
Maximum flow rate for Compact model: 170 m3/h
▪
Maximum flow rate for Galbé/Cube models: 218 m3/h
▪
Maximum flow rate for Maxi model: 400 m3/h
▪
Recommended size of premises to be ventilated:
o from 59 m² to 140 m² (Galbé, Cube models),
o from 50 m² to 120 m² (Urban)
o from 141 m² to 307 m² (Maxi model)
(Average renewal rate 0.5 vol/h, unchanging ceiling height of 2.5 m)
39