Setting The Rated Speed/Filter Duration; Consumption And Operating Time Screen - VENTILAIRSEC VMI PRESTIGE Manual De Instalación

4.4

Setting the rated speed/filter duration

Once you are in the installer mode, you should first get the rated speed setting screen. If not, press the
button as many times as necessary to get to the following
screen:
To know what speed and what filter duration you should set, refer to
chapter 4.9 Initial settings.
Use the buttons to select the field to change. The
confirms the new value and sends it to the VMI® unit. If the VMI® unit has received the new value, the
value is displayed in green. If not, the old value remains displayed in green. The
the change, displays the old value in green and returns to the field selection.
When you are selecting the field to change, use the
and operating time" screen.
4.5

Consumption and operating time screen

days
This screen shows the approximate cumulative consumption of the VMI® unit
in kWh year on year and the number of days the VMI® unit has been in
operation since it was commissioned.
Use the button to move on to the troubleshooting screen.
200
button
button to move on to the "consumption
button cancels
57