Envirolite FL2016N40-48 Instrucciones

INSTRUCTIONS FOR LED AREA LIGHT
MODEL FL2016N40-48
____________________________
INSTALLATION INSTRUCTIONS
Please read carefully and save these instructions. Failure to do so may
lead to electrical shock or fire, which may cause injury or death.
__________
WARNING – RISK OF FIRE: Turn off the main power at the circuit breaker
before installing the fixture or performing other maintenance in order to
prevent possible shock.
All electrical connections must be in accordance with the local and

National Electrical Code (N.E.C) standards. If you are unfamiliar with
proper electrical practices, obtain services of a qualified electrician.
Turn off the main power at circuit breaker before installing the fixture

in order to prevent possible shock.
Questions, Problems, Missing Parts? Please contact our Customer

Service Team at (855) 573-6156. Customer service hours are Monday
though Friday, between 8 AM and 6 PM Pacific Standard Time.
KEEP this instruction manual.

KEEP your receipt for proof of purchase.

CAUTION
_________
GENERAL
ASSEMBLY AND INSTALLATION
1. Pull the wires out from the base of the fixture and through the gasket.
2. Connect the black supply wire to the black fixture wire using a wire nut.
Connect the white supply wire to the white fixture wire using a wire nut.
Connect the ground supply wire to the ground fixture wire using a wire nut.
3. Wrap all wire connections with electrical tape for a more secure connection.
Note: If you have electrical questions, consult your local electrical code for
approved grounding methods.
4. Secure the fixture to an outlet box (Fig. A) or a round surface mounted outlet
box (Fig. B) using two mounting screws.
5. Loosen the screw on the neck of the fixture (Fig. C) to adjust the vertical
position of the light. Tighten the screw to secure position.
6. Loosen the nut on the neck of the fixture (Fig. C) to adjust the horizontal
position of the light. Tighten the nut to secure position.
4" Octagonal
Junction Box
4" Round
Weatherproof
Junction Box
Screw
Nut
Fig. A
Fig. B
Fig. C