Publicidad
Idiomas disponibles
Idiomas disponibles
English
Set clock:
•
Make sure that the clock radio is turned off.
•
Slide the switch on the back to '"SET CLOCK' and the display on the front panel flashes.
•
Press the << RW/ HR button on the top to adjust the hour.
•
Press the >> FF/ MIN button to adjust the minutes.
Set alarm:
•
Make sure that the clock radio is turned off.
•
Slide the switch on the back to the 'SET ALARM' position. Now the ALARM 1 indicator flashes on the display. (Press
the 'ALARM 2' button if you want to set Alarm 2)
•
Press the <<RW/ HR button to adjust the hour similar in Clock setting.
•
Press the >>FF/ MIN button to adjust the minutes.
•
Press the 'SOURCE button' to select the input source of the alarm; Buzzer, iPod®, FM radio and AM radio.*
•
The preset volume of the alarm is standard at level 22. By pressing the VOL.– or VOL.+ buttons you can adjust the
volume from 0 to 32. (Not applicable to the buzzer)
•
Slide the switch back to the 'LOCK' position to complete the alarm setting.
•
Press and hold the 'Alarm 1' or 'Alarm 2' button on top to toggle the alarm on/ off. The display shows which alarm is
activated.
•
Press the 'Alarm 1' or 'Alarm 2' button in any mode, it shows the alarm time and source. After 2 seconds the display
returns to the current time.
•
When the alarms rings pressing the 'Snooze' button to temporarily pause the alarm for 8 minutes.
* The alarms can be set with several sources; buzzer, iPod®, FM radio and AM radio.
•
If you wish to set the alarm with the AM/FM radio, please select a station before turning off the clock radio.
•
If you wish to set the alarm with your iPod®, please choose the song before turning the clock radio off.
•
The alarm sounds for a maximum of one hour, regardless of the source. Press the 'Power' button to reset the alarm
any time the alarm is sounding.
Remarks: Alarm 1 is a "Treble Beep" sound and the Alarm 2 is a "Double Beep" sound.
Set the radio:
•
In order to obtain a better reception on the FM radio, please plug in the FM antenna into the antenna jack on the rear
panel. The AM antenna is built in.
•
Press the 'Source' button repeatedly to select the FM or AM Radio mode.
•
Find the desired station with the '<<RW/HR' or '>>FF/Min' button.
•
Manual scan is applicable by pressing either the '<<RW/HR' or 'FF>>/MIN' buttons repeatedly.
•
Automatic scan is applicable by depressing and holding the '<<RW/HR' or 'FF>>/MIN' buttons. Release the button
and the system will scan and stop automatically at the first strong frequency.
Storing Stations in the Radio Memory:
Presetting radio stations can only be done by the remote control. The memory can store 10 FM and 10 AM stations.
•
Scan to a desired station, press the 'Memory' button on the remote control once and 'P01' appears on the display. '01'
flashes to indicate the storing location at preset #1.
•
Press the 'Preset' button to select the desired preset memory.
•
Press the 'Memory' button again, the '01' stops flashing to indicate that station is now stored in FM preset #1.
Recalling a preset station:
•
Press the 'Function' button to AM or FM.
•
Press the 'Preset' button on the remote control to scroll up the preset stations.
Listening to your iPod®:
•
Select the correct adaptor for your iPod® and secure it onto the clock radio. The iPod® will turn on automatically.
•
Select the iPod® function by pressing the 'Source' button repeatedly.
•
The iPod® click wheel can be used for navigation as usual. The speaker volume overrules the iPod® volume control.
Also the 'FF' and 'RW' buttons can navigate.
•
When you press the 'Source' button to switch to another function or turn off the clock radio, the iPod® will turn off
automatically. The iPod® will now be recharged.
English
Listen to other audio sources::
The clock radio is equipped with an Auxiliary input function that it is able to play sound from other MP3 players, personal CD
players, and other music sources.
•
Connect the included 3.5mm connection cable to the headphone jack of your audio source and to the 'Aux In' jack on
the back panel of the clock radio.
•
Press the 'Source' button to select the AUX function. The AUX indicator appears on the LCD display.
Sleep timer: :
The Sleep Timer automatically powers off the system after a user specified time (up to 90 min).
•
A single press of the 'Sleep' button initially sets the sleep timer for 90 minutes. Repeated presses decrease the sleep
timer in 15 minute increments, until the timer is disabled at 00. After 3 seconds, the Sleep Timer display automatically
returns to the current time.
Mute Control
(Remote Control Only)
•
Press the 'Mute' button on the remote control to stop the sound. The mute indicator appears on the display.
•
Cancel the mute function by pressing the 'Mute' button again or pressing the VOL.- or VOL.+
Mini USB Connector
•
Connect the included USB mini cable to the USB jack on the back side of the clock radio and to a PC. Now the iPod®
will be recognised as an external device and you can upload music easily.
Remote Control:
POWER ON:
Power on/ off the system
MUTE:
Mute the speakers of the system
SOURCE:
Select the input source
VOL. UP:
Volume up
DIMMER:
Adjust the backlit intensity
RW/ TUNER-: To skip backward iPod® mode, or scan backward in radio mode.
PLAY/ PAUSE: Play the music or toggle to pause.
FF/ TUNER+: To skip forward iPod® mode, or scan forward in radio mode.
REPEAT:
Set the iPod® to Repeat one/ Repeat all/ No Repeat and return.
VOL.DOWN:
Volume down
SHUFFLE:
Play songs Randomly.
SLEEP: Turn on / off and set the sleep time.
ALARM 1:
Turn on / off the alarm 1.
ALARM 2:
Turn on / off the alarm 2.
PRESET:
Recall a preset radio station.
SNOOZE:
Snooze the alarm
MEMORY:
Store the radio station in memory.
Publicidad
