Basement Sentry STBC201 Instrucciones De Instalación página 18

START-UP AND OPERATION
8. Push the 'Silence' button when the pump is running
to turn off the alarm. The pump will continue to run
for an additional ten seconds after the float has been
lowered or until the controller senses water is being
pumped.
9. Press and hold the 'Silence' button for three seconds
to reset the system and clear all faults and alarms.
10. The four circle LED's will be blue when charging
the battery. The battery LED will flash slowly. Once
charging is complete, all four circle LED's will turn
green.
18
© 2020. All rights reserved.
8
P L U S
AC FLOAT
POWER STATUS
24/7 BASEMENT
PROTECTION
DC
BATTERY
PUMP
USB
1-800-584-8089
DC FUSE
BasementSentry.com
RESET FLOAT PUMP 30 AMP
9
P L U S
AC FLOAT
POWER STATUS
24/7 BASEMENT
PROTECTION
DC
BATTERY
PUMP
USB
1-800-584-8089
DC FUSE
BasementSentry.com
RESET FLOAT PUMP 30 AMP
10
P L U S
AC FLOAT
POWER STATUS
24/7 BASEMENT
PROTECTION
DC
BATTERY
PUMP
USB
1-800-584-8089
DC FUSE
BasementSentry.com
RESET FLOAT PUMP 30 AMP
by
Press to
TEST
silence
alarms
SILENCE
DC POWER
+ 15V DC 1.6A
by
Press and
TEST
hold three
seconds to
reset
SILENCE
system
DC POWER
+ 15V DC 1.6A
Solid green light
when charged
by
Press to
TEST
silence
alarms
SILENCE
DC POWER
+ 15V DC 1.6A