Conexiones De Audio - Behringer A500 Manual De Uso

9
REFERENCE AMPLIFIER A500 Manual de uso

4.3 Conexiones de audio

Para las diferentes aplicaciones requiere diversos tipos de cable. Las siguientes
ilustraciones le muestran cómo deben ser éstos. Utilice siempre cables de
alta calidad.
Balanced use with XLR connectors
2 1
3
input
1 = ground/shield
2 = hot (+ve)
3 = cold (-ve)
1
2
3
output
For unbalanced use, pin 1 and pin 3
have to be bridged
Fig. 4.1: Conectores XLR
Unbalanced ¼" TS connector
strain relief clamp
sleeve
tip
sleeve
(ground/shield)
tip
(signal)
Fig. 4.2: Jack mono de 6,3 mm
Balanced ¼" TRS connector
strain relief clamp
sleeve
ring
tip
sleeve
ground/shield
ring
cold (-ve)
tip
hot (+ve)
For connection of balanced and unbalanced plugs,
ring and sleeve have to be bridged at the stereo plug.
Fig. 4.3: Jack estéreo de 6,3 mm
tip
sleeve
shield
Fig. 4.4: Conexiones RCA no balanceadas
tip
sleeve