TKT STIMA-CMP Guia Operativa página 13

STIMA-CMP STIMA-CMP
• Paper specifi cation
• Caratteristiche della carta
• Caractéristiques du papier
• Papier spezifi kation
• Caracteristicas del papel
Ticket axis
Dmin Dmin
+1 +1
mm mm
9 9
0 0
Notch
H
L
direction
of
paper feed
Ticket margin
GB
TICKET WITH NOTCH/BLACK MARK
• The notch/black mark can be placed on heat sensi-
tive side or non heat sensitive side.
• Set the "Notch Position" parameter value based on
the location of the notch:
Ticket side
Heat sensitive
Non heat sensitive
• L = paper width used (from 20mm to 82.5mm);
• Dmin = minimum notch dimensions;
• D1 = minimum notch to notch distance.
TICKET WITH NOTCH/HOLE
• The printer manages tickets with notch/hole by set-
ting the "Notch position" as "Transparence" value.
The gap can be positioned along the width of the
ticket.
• L = paper width used (from 20mm to 82.5mm);
• H = minimum height managed (2mm);
• D = minimum width managed (10mm)
<9>
Notch position
Up
Down
NON HEAT SENSITIVE SIDE
HEAT SENSITIVE SIDE
U