Recommendations - Amibot Swift Manual Del Usuario

EN

Recommendations

• AMIBOT Swift Connect is designed to be used inside.
• AMIBOT Swift Connect is designed for routine floor cleaning. It is
not intended to replace heavy-duty cleaning.
• Before using the robot, ensure that the area to be cleaned is
not cluttered and remove any obstacles that may get in its way
during the cleaning cycle.
• Unplug and remove any power cables and small objects that may
damage or interfere with the robot.
• AMIBOT Swift Connect cannot go over thresholds.
• AMIBOT Swift Connect is not designed to be used on carpets,
which could cause the robot to freeze or reverse.
• AMIBOT Swift Connect needs a headway of at least 8 cm so that
it can go under furniture.
• AMIBOT Swift Connect must be used on flat surfaces.
• AMIBOT Swift Connect must not be used on dark or extremely
sunny floors.
• If the robot could come across a gap while cleaning, please secure
the area and check that the gap sensors are clean.
• AMIBOT Swift Connect is not designed to vacuum water or other
liquids.
• Do not use the appliance on wet surfaces.
• Please switch the appliance off before handling it (manually
moving it, maintenance, storing it away).
2