HoMedics NMSQ-217HJ Manual De Instrucciones página 4

INSTRUCTIONS FOR USE
Fig. 1
Fig. 2
Fig. 3
Fig. 4
1. Insert adapter jack into the plug underneath left handle strap (Fig. 1).
2. Plug into an AC 120-volt outlet.
3. This unit incorporates a wire frame allowing you to contour the unit
to your neck. Place massager on your neck and mold the wire framing to
desired position (Fig. 2).
4. To activate the massage action, press the
pad (Fig. 3).
5. Press once for low speed, a second time for high, and press again
to turn the unit off.
6. To activate the heat function, with massage running, press the
button on the control pad (Fig. 3).
7. To turn off the heat function, simply press the
NOTE: Heat is a mild, comfortable heat.
OPTIONAL BATTERY INSTRUCTIONS
NOTE: Batteries will only operate the massage function. You must use the
adapter to activate the heat function.
1. Locate the zipper on the back of the unit.
2. Unzip to expose the battery compartment, remove lid (Fig. 4).
3. Insert 4 AA batteries (not included). Proper battery orientation is noted
inside the battery compartment housing.
4. Replace the cover and zip the back portion up, making sure both zipper
ends are touching each other to ensure zipper is closed properly.
5. To activate massage, follow steps 4 – 5 from adapter instructions.
4
button on the control
button again.