Instructions For Use; Charging Procedure - ABL Wallbox eMH2 Guía Rápida

y The charging socket, the fixed charging cable or its charging coupler is visibly damaged or no
longer functions correctly.

Instructions for use

ƒ To disconnect the product completely from the electricity grid, the power supply must be interrupted
using the upstream safety switches and fault current protection devices in the domestic power
distribution.
ƒ Ensure that the charging cable is not subjected to tensile stress at any time.
ƒ Make sure that the product is always closed and locked when in use.
ƒ Only have the product repaired by a qualified electrician.

Charging procedure

Proceed as follows to charge an electric vehicle using the Wallbox eMH2:
1
Park your electric vehicle so that the charging port on the vehicle can be easily reached with the
charging coupler of the charging cable.
2
Observe the LED indicators on the wall box:
y When the wall box is ready for operation
the green LED will pulsate.
3
Prepare the charging cable of the wall box.
y Cable version type 2
Gently lift the charging coupler and pull it
back from the coupler pocket.
y Socket version type 2
Open the flap of the charging socket and
insert the charging plug.
4
Open the charging port on the vehicle and
insert the charging coupler .
5 Observe the LED indicators on the wall box:
y If the wall box is waiting for the charging
procedure to be enabled by the user, the
green LED will illuminate.
6
Hold the RFID card included in the scope of
delivery in front of the RFID symbol on the
housing panel.
Wallbox eMH2 – Instructions for use
13
|