SilverStone Nitrogon NT07-115X Guia De Instalacion

Warranty Information
This product has a limited 3 year warranty in North America, Europe, and Australia.
For information on warranty periods in other regions, please contact your reseller or SilverStone authorized distributor.
Warranty terms & conditions
1. Product component defects or damages resulted from defective production is covered under warranty.
Defects or damages with the following conditions will be fixed or replaced under SilverStone Technology's jurisdiction.
a) Usage in accordance with instructions provided in this manual, with no misuse, overuse, or other inappropriate actions.
b) Damage not caused by natural disaster (thunder, fire, earthquake, flood, salt, wind, insect, animals, etc...)
c) Product is not disassembled, modified, or fixed. Components not disassembled or replaced.
d) Warranty mark/stickers are not removed or broken.
Loss or damages resulted from conditions other than ones listed above are not covered under warranty.
2. Under warranty, SilverStone Technology's maximum liability is limited to the current market value for the product (depreciated value, excluding
shipping, handling, and other fees). SilverStone Technology is not responsible for other damages or loss associated with the use of product.
3. Under warranty, SilverStone Technology is obligated to repair or replace its defective products. Under no circumstances will SilverStone
Technology be liable for damages in connection with the sale, purchase, or use including but not limited to loss of data, loss of business, loss of
profits, loss of use of the product or incidental or consequential damage whether or not foreseeable and whether or not based on breach of warranty,
contract or negligence, even if SilverStone Technology has been advised of the possibility of such damages.
4. Warranty covers only the original purchaser through authorized SilverStone distributors and resellers and is not transferable to a second hand
purchaser.
5. You must provide sales receipt or invoice with clear indication of purchase date to determine warranty eligibility.
6. If a problem develops during the warranty period, please contact your retailer/reseller/SilverStone authorized distributors or SilverStone
http://www.silverstonetek.com.
Please note that: (i) You must provide proof of original purchase of the product by a dated itemized receipt; (ii) You shall bear the cost of shipping
(or otherwise transporting) the product to SilverStone authorized distributors. SilverStone authorized distributors will bear the cost of shipping
(or otherwise transporting) the product back to you after completing the warranty service; (iii) Before you send the product, you must be issued a
Return Merchandise Authorization ("RMA") number from SilverStone. Updated warranty information will be posted on SilverStone's official website.
Please visit http://www.silverstonetek.com for the latest updates.
Additional info & contacts
For North America (usasupport@silverstonetek.com)
SilverStone Technology in North America may repair or replace defective product with refurbished product that is not new but has been functionally tested.
Replacement product will be warranted for remainder of the warranty period or thirty days, whichever is longer. All products should be sent
back to the place of purchase if it is within 30 days of purchase, after 30 days, customers need to initiate RMA procedure with SilverStone Technology
in USA by first downloading the "USA RMA form for end-users" form from the below link and follow its instructions.
http://silverstonetek.com/contactus.php
For Australia only (support@silverstonetek.com)
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Please refer to above "Warranty terms & conditions" for further warranty details.
SilverStone Technology Co., Ltd. 12F No. 168 Jiankang Rd., Zhonghe Dist., New Taipei City 235 Taiwan R.O.C. + 886-2-8228-1238
(standard international call charges apply)
For Europe (support.eu@silverstonetek.de)
For all other regions (support@silverstonetek.com)
2013
NO.G11219731
Nitrogon Series
NT07-115X
Superior low-profile
thermal solution for
Intel LGA1156 / 1155 / 1150
65w
SPECIAL FEATURES
Support Intel LGA1156/1155/1150 processors
Designed for low profile systems at only 23mm tall
Large, custom 80mm PWM fan for excellent cooling and low noise
Copper center and base with extruded aluminum fins
Easy to install
INTRODUCTION
SilverStone Technology's Nitrogon NT07-115X is a super slim profile CPU cooler designed for space limited
applications that utilizes LGA 1156, 1155, or 1150 platforms. It has a copper center construction with extruded aluminum
fins for excellent thermal conductive capability that rivals many larger coolers. The custom 80mm PWM fan was
designed with fan blades to achieve the highest air pressure possible while maintaining an acoustic profile that is rare
for cooler of this size. At a total height of only 23mm tall, the NT07-115X is an essential choice for super slim cases
such as SilverStone Petit PT12 or PT13 utilizing LGA 1156, 1155, or 1150 processors.
Install included back-plate onto
Установите прилагаемую установочную
the backside of the motherboard.
панель на задней части системной платы.
請將所附背板安裝於主機板背面。
Installieren Sie die mitgelieferte
Rückplatte an der Rückseite des
Motherboards.
请将所附背板安装于主机板背面。
Installez la plaque arrière sur la face
arrière de la carte mère.
Instale la placa trasera incluida en la
付属のバックプレートをマザーボードの裏側に取
parte trasera de la placa base.
り付けます。
Installare la piastra posteriore fornita 제공된 백 플레이트를 메인보드의 뒷면에 설치합니다.
in dotazione sul retro della scheda
madre.
65W