INSTALLATION INSTRUCTIONS
Step 2: Adjustable Level
2
2. In case of uneven floors, floor levelers are provided
at the bottom of the vanity. If necessary, adj ust floor
leveler by hand to correct tilting and /or level doors.
Step 3: Backsplash Installation
3
3. To mount the backslash (C) to the wall, apply a thin bead of
C
silicone compound (not included) to the unpolished back
side and bottom of the backsplash (C). Position backsplash
(C) as shown onto vanity top (B) and against the wall. Clean
any excess silicone compound before allowing it to dry.
B
4