Before Using The Appliance For The First Time; Cleaning And Maintenance Of Your Ice Cube Maker - Wilfa FROSTBITT ICE-12S Manual De Instrucciones

BEFORE USING THE APPLIANCE FOR THE FIRST TIME

1. Remove external and internal packaging.
2. Remove tape fastened over the ice spoon, ice basket and ice tray. Clean the
container and the ice basket.
3. Place the ice cube maker on an even surface, away from direct sunlight and
other heat sources (i.e.: hobs, ovens, radiators). Place the appliance so that
there is at least 10cm distance between the back and sides of the appliance
and the wall.
4. The appliance should be left to stand for at least 1 hour before starting it up.
This is to allow the cooling system to stabilise.
Warning: Use drinking water only.
CLEANING AND MAINTENANCE OF YOUR ICE CUBE
MAKER
It is recommended to carefully clean the ice cube maker before using it.
1. Remove the ice basket.
2. Clean internally using diluted detergent, warm water and a soft cloth.
3. Use water to rinse the internal parts and empty the water by removing the
outlet plug on the front of the base.
4. The ice cube maker exterior should be cleaned regularly using a mild
detergent and warm water.
5. Dry internally and externally using a clean, soft cloth.
6. When the appliance is not in use, empty out all water and dry the container.
ICE CUBE MAKER · ICE-12S
9
EN