Maintenance And Care; Disposal Information; Declaration Of Conformity; Guarantee - Flex GM 320 Manual Del Usuario

Maintenance and care

Repairs
Repairs may be carried out by an authorised
customer service centre only.
Spare parts and accessories
Accessories can be found in the
manufacturer's catalogue.

Disposal information

t^okfkd>
oÉåÇÉê=êÉÇìåÇ~åí=éçïÉê=íççäë=ìåìë~ÄäÉ=
Äó êÉãçîáåÖ=íÜÉ=éçïÉê=ÅçêÇK
EU countries only
Do not throw electric power tools into
the household waste!
In accordance with the European Directive
2012/19/EU on Waste Electrical and
Electronic Equipment and transposition into
national law used electric power tools must
be collected separately and recycled in an
environmentally friendly manner.
klqb
mäÉ~ëÉ=~ëâ=óçìê=ÇÉ~äÉê=~Äçìí=Çáëéçë~ä=
çéíáçåë>

-Declaration of Conformity

We declare under our sole responsibility that
the product described under "Technical
Data" conforms to the following standards or
normative documents:
In accordance with the regulations of
the directives 2006/95/EC, 2011/65/EU.
Technical file at:
FLEX-Elektrowerkzeuge GmbH, R & D
Bahnhofstrasse 15, D-71711 Steinheim/Murr
Eckhard Rühle Klaus Peter Weinper
Manager Research &
Head of Quality
Development (R & D) Department (QD)
18.06.2014; FLEX-Elektrowerkzeuge GmbH
Bahnhofstrasse 15, D-71711 Steinheim/Murr
10

Guarantee

When a new machine is purchased, FLEX
issues the end user with a 2-year manu-
facturer's warranty which comes into force
on the date the machine was purchased.
The guarantee covers only defects which
can be attributed to a material and/or
production fault as well as non-performance
of warranted characteristics. When making
a claim under the guarantee, enclose the
original sales receipt with purchase date.
Repairs under the guarantee may be carried
out only by workshops or service centres
authorised by Flex. A claim may be made
under the guarantee only if the power tool
has been used as intended.
The guarantee excludes in particular
operational wear, improper use, partly or
completely dismantled machines as well as
damage caused by overloading the machine,
use of non-permitted, defective or incorrectly
used application tools. Damage which is
caused by the machine on the application
tool or workpiece, use of force, consequential
damage which can be attributed to improper
or inadequate maintenance on the part of the
customer or a third party, damage caused
by external effects or foreign objects,
e.g. sand or stones, as well as damage
caused by non-observance of the operating
manual, e.g. connection to an incorrect
mains voltage or current type.
Claims for insertable tools or accessories can
only be made under the guarantee provided
they are used with power tools for the
intended or permitted use.
Exemption from liability
The manufacturer and his representative are
not liable for any damage and lost profit due
to interruption in business caused by the
product or by an unusable product.
The manufacturer and his representative are
not liable for any damage which was caused
by improper use of the power tool or by use
of the power tool with products from other
manufacturers.
Giraffemobile GM 320