Moulinex hapto Manual De Instrucciones página 17

- Fit the motor unit (A) onto the lid (E4).
- Plug in the motor unit (A) and press the speed start button (B1 or B2)
and process food.
- Remove the motor unit (A) then the lid (E4) then the inner cover (E3).
- Remove the blades (E2), holding it by its plastic part.
- After use, remove the ingredients.
- Do not operate this accessory when empty or for more than 10 sec-
onds.
• Mini chopper 450mL (depending on model): FIG F & 8
- Fit the blades (F2) onto the drive pin of the bowl (F1).
- Place the ingredients in the bowl (F1) then fit the cover (F3).
- Fit the motor unit (A) onto the cover (F3).
- Plug in the motor unit (A) and press the speed start button (B1 or B2).
- Remove the motor unit (A) then the cover (F3).
- Remove the blades (F2) holding it by its plastic part.
- After use, remove the ingredients.
- Do not operate this accessory when empty.
• Maxi chopper 600mL (depending on model): FIG G & 9
- Fit the blades (G2) onto the drive pin of the bowl (G1).
- Place the ingredients in the bowl (G1) then fit the cover (G3).
- Fit the motor unit (A) onto the cover (G3).
- Plug in the motor unit (A) and press the speed start button (B1 or B2).
- Remove the motor unit (A) then the cover (G3).
- Remove the blades (G2) holding it by its plastic part.
- After use, remove the ingredients.
- Do not operate this accessory when empty.
• Multi-function 2L bowl (depending on model): Fig I
Allows you to prepare from 150 to 500 g – Volume of bowl: 2 litres.
1) Mincing and chopping Fig 10:
- Place the spindle (I2) in the centre of the bowl (I1).
- Fit the blades (I3) onto the spindle (I2).
- Fit the reducer (I5) onto the lid (I4).
- Fit and lock the cover in place.
- Fit the motor unit (A) onto the reducer (I5).
17
EN