EXALTA EL-301 Manual De Utilización página 12

Important: The product should always be turned off before
connecting it to the mains.
Changing / inserting rechargeable battery
The product comes with two sets of rechargeable batteries.
To remove the battery from the product just press the button as shown in
the figure. To put it on simply hook it until you hear a click indicating that
the battery is hooked
CUTTING LENGHT ADJUSTMENT
It is possible to set the clipper on 4 different cutting lengths from a
minimum of 1 mm to 1.9 mm. To do so just move the button while holding
down the lock button and move the cursor to the desired cutting length.
COMB GUIDES
Thanks to the 2 cutting guides supplied, you can adjust the cutting length
up to a maximum of 12 mm (with comb inserted)
The cutting lengths are the following:
Without cutting guide: 1 mm-1,3 mm-1,6 mm-1,9 mm
Cutting guide 3 or 6 mm. It depends on the attached guide side.
Cutting guide 9 or 12 mm. It depends on the attached guide side.
WARNING:
when you fit or remove the cutting guide, the appliance
12