How To Attach The Stand; How To Remove The Stand - Hitachi LE32LM206 Guia Del Usuario

1. Please take out the accessory bag from the package, check all the parts below are
complete with nothing missing, if not please contact the agency.
Base Conector Bracket
(LE42LS256)
(LE32LM206)
2. Please take the TV set out, and carefully put the TV set with its front side
facing down on flat surface with table cloth or other soft cushion.
3. Install the plastic gasket, the connector Bracket and the glass base
in proper order. (Only LE42LS256)
perform the above steps in reverse order.
For wall mounting, the base must be
Plastic gasket Neck Screws
(1 PCS)
M4 X10(4 PCS)
M4 X10(4 PCS)
support
soft cushion
removed. To disconnect the base/stand remove the 4 screws from the back.

How to attach the stand

4. Connected the glass base and the connector bracket
with four M5x22 screws for LE42LS256, and one
M4x10 for LE32LM206.
Base Screws
M5 X22(4 PCS)
M4X10 (1 PC)
5. Assembly the base assy and the TV set as the image.
6. Lastly attach the base assy with 4pcs M4 X10 screws.
Attention: Be sure that the base assembly does not fall

How to remove the stand

Screws
(LE42LS256)
(LE32LM206)
and make sure the screws are fastened securely.
6