Setup Settings; Parental Controls - Hitachi LE32LM206 Guia Del Usuario

Channels Settings
Note: These settings are only available in TV mode.
Source
Select the Source for the TV. Select Air for using an indoor
or outdoor antenna. Select Cable for using a cable system.
Auto Scan
This feature will automatically store active Analog and
Digital channels to the Channel list. This scan will erase all
channels previously stored in the list.
Channel No.
Sets the received TV channel No.
Signal System
Press" / "button to select "Auto /NTSC /PAL M/ PAL N" Mode.
Fine Tuning
Fine tuned the channel frequesncy.
Channel Skip
This function allows you to add channels to the channel
memory.
Channels
Source
Air
Auto Scan
Channel No. 3
Signal System Auto
60.25 MHz
Fine Tuning
Channel Skip On
:
TV 0 Channel
CH 4 56.00 MHz (Cable)
M E N U

Setup Settings

Menu Language
Sets the Language of the Menu OSD. This feature will allow you to
select any one of three different languages for the on-screen displays.
Panel Lock
When Panel Lock is turned On, all buttons on the front panel, except
the POWER button, will be deactivated.
Closed Caption
Select the type of CCD (CC1 ~ CC4, Text1 ~ Text4).
Reset
The Reset function returns your settings to the factory settings.
Setup
Menu Language English
Panel Lock
Off
Closed Caption CC 1
Reset

Parental Controls

Press / button to select Advanced menu, then press [SELECT]
button to enter. Input password to enter, default password is" 0000 " .
Parental Controls
Set Password
Rating Block On
TV-Rating
PG
Movie-Rating
Canadian English C8+
Canadian French G
Block Unrated TV No
Enter password
Clear Cancel
ree R ecord Li m
Set Password
To set your own password, first enter the old password,
and then enter your new password twice, following the
prompts as illustrated below.
Enter Old Password
Enter New Password
Confirm Password
Clear Cancel
ree R ecord Li m
MENU CONTROL
14