Kohler K-1201-CB Diagrama De Instalación página 2

Pump/Control Access
20" (508 mm) W x
15" (381 mm) H
2-3/4"
(70 mm)
Product Information
Applicable product:
Drop-in rim style, custom pump
Fixture*:
Bathing well:
Basin area, bottom 42" (1067 mm) x 17" (432 mm)
Basin area, top 55" (1397 mm) x 25" (635 mm)
Weight 93 lbs (42.2 kg)
To overflow:
Water depth 12-1/8" (308 mm)
Capacity 50 gal (189.3 L)
* Approximate measurements for comparison only.
Drop-in cut-out 58-1/2" (1486 mm) x 40-1/2" (1029 mm)
Pump: V
1-speed 120
Minimum access panel
pump/control (required):
1013055-1-D
7-1/2"
(191 mm) Max
1-1/2"
(38 mm)
8-1/2" (216 mm)
60" (1524 mm)
2-7/8"
3" (76 mm)
(73 mm)
K-1201-CB
Hz A
60 7.5
20" (508 mm) W x
15" (381 mm) H
No change in measurements if connected with drain
illustrated. (K-7161-AF or K-7161M-AF)
15"
(381 mm)
17"
(432 mm)
3/16" (5 mm)
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
Locate the outlet behind the whirlpool and within 24" (610
mm) of the pump.
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
43 lbs/square foot (209 kg/square meter) loading.
The apron must be installed before the finished floor and wall
materials are installed.
Pump must be relocated to custom position at the time of
installation. Provide adequate clearance.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
2
30" (762 mm)
Ø 1-1/2"
120 V, 15 A, 60 Hz
1-1/2"
(38 mm)
Kohler Co.