Commissioning; Brewing Coffee With Coffee Powder - Klarstein Grind & Brew Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

COMMISSIONING

Before the first use
Make sure that all accessories are complete and that the device is not damaged. Fill the
water tank with water up to the maximum indicator and let the machine brew several
times with water without adding coffee powder. Then pour the water away. Carefully
clean all removable accessories, such as the funnel and funnel cover, with warm water.

BREWING COFFEE WITH COFFEE POWDER

1. Open the water tank cover and fill the water tank with the desired amount of water.
For example, if you fill the water tank to the „2" mark, you will then receive 2 cups
of coffee. Then close the water tank cover.
Note: Do not fill the water tank higher than the maximum mark. A maximum of 10
cups of coffee can be brewed.
2. Open the funnel holder. Insert the funnel, paper filter and funnel cover into the
funnel holder in the following sequence. Make sure that all accessories are properly
attached to the machine.
3. Insert the appropriate amount of ground coffee into the machine (see Table 1).
Normally, one spoon of ground coffee is required per cup of coffee. However, this
can be adjusted according to personal taste.
Note: The funnel holder must be in the closed position. Otherwise, the glass carafe
cannot be placed on the hot plate normally and the brewing process cannot be
carried out properly.
Quantity of coffee (cups)
2
4
6
8
10
One spoonful of ground coffee corresponds to about 5-7 g.
Coffee powder quantity
(spoons)
2
4
6
8
10
Water quantity (scaling)
2
4
6
8
10
EN
21

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

10035672

Tabla de contenido