Steren STV-064 Manual De Instrucciones página 2

User Manual
13" to 50" TV STAND
Before to use the product, please read carefully this manual to avoid any malfunction.
V0.0/1018v
PLACE THE PLATE
Place the extension arms in each corner of the base and
fix it into the screen.
For 10" and 35" screens is not necessary place the arms,
you can use the holes of the plate.
CONTENT
x4 x4 x4
M4x12mm M6x12mm M8x15mm
(A) (B) (C)
x3 x7 x4 x4
(G) (H)
M6 M6
(E) (F)
TOOLS MAY YOU NEED (not included)
INSTALLATION INTO SCREEN
1. Remove the screws and mounting it in the articulated arm
(with the plate installed).
3. Inclinate the screen
and customize the view.
a) Into concrete
Use a level and the stand like template to make
the drill marks.
Use a 10 mm broach to drill over the marks to a
x3
M6
(D)
x4
(I)
The arrow must pointed to up.
Ensure that there not hidden pipes of water, gas or electricity.
2. Place the screws again to fix the barrs
in the structure of the stand.
4. Tighten the secure until the stand remains firm.
INSTALLATION
b) Into wood
Use a level and the stand like template to
Use a 4.5 mm broach to drill over the
2" depth.
The arrow must pointed to up.
• Choose a flat and solid wall to can fix the stand.
• Don't tighten excessively the screws.
• For indoor use.
• Avoid the drops, may damage the product.
• Do not exceed the maximum charge capacity (25 kg).
• For the install into wood, ensure that this be rigid.
• This device is not designed for be using by people
(including children) with physical capacities, sensorial or
mental reduced, or they don't have the necessary
experience or knowledge.
• The children should be supervised to ensure that don't
use it like a toy.
make the drill marks.
marks to a 2" depth.
CAUTIONS