Fault Finding Chart - Flymo Multi-Trim CT250X Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 46
WARNING
Avoid accidental starting, keep hands and fingers away from the switch lever whilst attempting any
maintenance or adjustment.
FAULT
LINE NOT FEEDING
OR
LINE TOO SHORT
OR
TRIMMER VIBRATES
CONTINUOUS
CLATTERING NOISE
LINE SNAPS
CONTINUOUSLY
IF NONE OF THE ABOVE
OR IF FAULT PERSISTS
After you have finished using your Flymo trimmer
follow the procedure below:
• Avoid accidental starting. Keep your hands
and fingers away from the switch lever while
inspecting, cleaning or carrying out any
maintenance work.
• Keep fingers and hands clear of line cutter on
leading edge of guard.
1. Never clean your trimmer with water, cleaning
fluids, or solvents, just remove debris with a
suitable tool, a soft brush or dry cloth.
2. Using the scraper provided, clean around the
inside of the safety guard to remove any grass and
debris. (Y1)

Fault Finding Chart

CHECK
Is the automatic line feed
working?
Is the line fed out and
visible?
Is the manual line feed
working?
Has the motor reached full
speed before use?
Has too much line been fed
out?
Is the line cutter missing from
the safety guard?
Are you using the trimmer
correctly?
Is the line jamming on the
spool?
Contact your local Electrolux Outdoor Products Approved
Service Centre
Caring for your Cordless Trimmer
Manually feed out line.
No
SEE "MANUAL LINE FEED"
Remove cap and spool, free line
and re-fit spool and cap.
No
SEE "SPOOL CAP AND
NYLON LINE"
The line may be jammed on the
No
spool. Rewind line to remove
crossed loops.
Allow the motor to reach full
No
speed before use
Yes
SEE "MANUAL LINE FEED"
Contact your local approved
Yes
Service Centre or Electrolux
Outdoor Products Customer
Service.
Only use tip of nylon line to trim.
?
SEE "How to trim and edge"
Rewind the line on the spool, if
Yes
symptoms still persist, change
spool and line.
3. Using a soft brush, clean around the inside of the
safety guard (Y2), the cutting head (Y3) and the
motor housing. (Y4)
4. Inspect the trimmer carefully, especially the parts
of the cutting head.
5. If your trimmer is damaged in any way contact
your local Electrolux Outdoor Products approved
service centre.
• Never use a damaged trimmer
6. Store in a cool, dry place and out of reach of
children.
ACTION
ENGLISH - 4

Publicidad

Tabla de contenido
loading

Tabla de contenido