Fields Of Use - CEMO 1100/1 Manual Del Usuario

GB
IBC Collecting-Trough
Tank documents and technical
information, Approval No.: Z-40.22-564
1. Approval
"OPERATOR EXCERPT"
2. Transport, installation and
operating instructions
3. Inspection declaration
Important documents for the operator!
Please keep in a safe place!
(Documents are to be presented during
inspections of the tank system.)
2. Transport, installation and
operating instructions
Dear customer,
The PE collecting trough is a quality product that has
been conceived for practical use down to the last detail
and meets all official requirements for a problem-free
use. Details can be found in the following operating
instructions. Thank you for trusting our product.
Your CEMO
1. General information
1.1 Attention should be paid to the following documents
– Approval Z-40.22-564, for PE collecting trough
(operator extract)
– Regulations of the water, industrial and building
laws, hazardous substances law where applicable
– Inspection declaration

1.2 Fields of use

The rectangular, open collecting troughs of poly ethylene
(PE) can be used as a part of storage systems with
mobile containers.
They are provided for storing:
– u sed and unused engine and gear oils with flash
points above 100°C
– pesticides
– various acids, alkaline solutions, saline solutions
and chemicals according to the resistance list in
the approval.
8
2. Transport
Pay special attention to the following to avoid damages
and maintain the warranty claims:
3. Installation conditions
page follows
The installation conditions for the respective media can
be found in the pertinent water, industrial and building
law regulations. The PE collecting troughs should be
page 7
installed on a firm, level base.
page 7
4. Maintenance
PE collecting troughs require no special maintenance.
The collecting trough should be checked regularly by
the operator according to its approval.
3. Inspection declaration
Inspection declaration
for PE collecting trough
of LD-PE as a storage system
for mobile containers.
Article No.:
Approval number:
We confirm that the PE collecting trough complies
with the provisions of the general construction
inspection approval. The construction and leak tests
have been performed.
Quality Assurance
– do not drop or throw the collecting trough
– do not place on edges or sharp objects
211.X
Z-40.22-564