8. Reconnect negative (-) battery cable to
battery.
CAUTION
Shutting off the fl ow restrictor valve
could interfere with lowering the
platform. Ensure the valve is only
set to increase the time to lower
platform to the ground.
9. Test the Liftgate for proper operation,
and check for hydraulic leaks. Raise and
lower the platform several times. Adjust
the fl ow restrictor knob to increase the
time (slowing) to lower platform to the
ground.
10. Bolt cover to main frame as shown in
FIG. 6-1.
©
MAXON Lift Corp. 2021
LIFT CORPORATION Sht. 6 of 12 DSG#
COVER
FLAT WASHERS
HEX NUT AND
(3 PLACES)
REINSTALLING COVER
M-21-11
Rev. - Date: 06/25/21
MAIN FRAME
FIG. 6-1