Cleaning And Maintenance; Available Versions - Cata U-Comfort Serie Manual De Instrucciones

The product and its parts must not be submer-
ged in water or other liquids.
The IP rating is only valid if the installation of the
appliance complies with what is indicated in this
manual.
The manufacturer declines all responsibility for
personal injury or damage to animals or objects
caused by inappropriate use of the appliance
according to the warnings for installation, use
and maintenance described in this instruction
manual.
After finishing the installation these instructions
• Before cleaning make sure that the appliance is not
connected to the electric network and prevent it from
being reconnected by accident.
* Wait until moving parts have come to a complete
stop.
• Clean with a damp cloth regularly.
• The motor, propeller and all components should be
inspected periodically to ensure that they are not dir-
ty and have not suffered any damage. The frequency
of inspections depends on the appliance's operating
conditions.
• Remove the dirt on the propeller and the inner parts
of the casing to avoid imbalances during operation,
Timer
√
Timer

CLEANING AND MAINTENANCE

AVAILABLE VERSIONS

• STANDARD. No adjust-
ments required
• TIMER. Time-out can be
set to between 1.5' and 20'
(depending on the model).
should be given to the owner/user of the
appliance.
Appliance designed to be used in Fixed
installation.
The appliance must be able to be disconnec-
ted from the mains electricity supply after
installation.
It can be disconnected by making the plug ac-
cessible or adding a switch to the fixed wiring
in accordance with the installation regulations
currently in force in the country.
a decrease in aerodynamic performance and motor
damage.
* Never clean using pressurised water jets.
• The appliance does
maintenance.
Always demand original spare parts for repairs.
Any tampering with the appliance by services other
than the Manufacturer's Official Services will void the
product warranty.
THE MANUFACTURER reserves the right to make any
technological improvement or modification without
prior notification.
√
√
Timer
not require additional
• TIMER-HYGRO. Activated
by moisture detection be-
tween 30% and 80%. Time-
out can be set to between 1'
and 20' (depending on the
model).
ENGLISH