Tripp-Lite B126-1A1-WHD3 Manual Del Propietário página 3

Indicators and Connections
HDMI TX Back Panel
HDMI RX Back Panel
A
Power Input: Connect included power supply adapter for power
B
HDMI Input: Connect to HDMI source with HDMI cable
C
HDMI Output: Connect to HDMI display with HDMI cable
D
Signal Indicator LED: Green LED remains solid to indicate HDMI signal
E
Wireless Indicator LED: LED will illuminate green when HDMI signal is
obtained; will blink when data is transmitting
F
Data Transmission LED: Green LED will blink slowly when connection
is building and will blink quickly when it is successfully connected and
transmitting data
G IR-IN (Rx) Port: Connect included IR-IN (Rx) cable
Note: Be sure the source remote control is within the required range of IR receiver
H
IR-OUT (Tx) Port: Connect included IR-OUT (Tx) cable
Note: IR Blaster cable should be placed close to source device for best results
A B D
A E F C
3
E H
G