Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Cable Test Results
Pass Indicators:
Shield
Green SHIELD LED indicates the shield on the cable
is correctly and continuously wired through the
modular plug termination.
Standard Wiring
Four green LEDs on pairs 1-2, 3-6, 4-5, and 7-8
indicate all four pairs are terminated correctly.
Fail Indicators:
A flashing green LED indicates which wire pair(s)
have a fault. A solid red LED in the FAIL section will
indicate which fault(s) are detected. Multiple flashing
green LEDs or solid red LEDs indicate multiple pairs
and/or multiple faults.
Short
A short circuit condition exists.
Open
An open circuit condition exists. There is no
"OPEN" LED indicator. OPENS are displayed
as an unlit LED. See DEBUG Example #2 as
reference.
5
01-155-9337F4.indb 5
2/20/2018 9:59:40 A
Publicidad
Tabla de contenido
