Publicidad
Installation and electrical connections must be carried out by qualified personnel only.
Carefully follow all regulations regarding installation and systems that are applicable in the country
where the product is to be installed.
PLEASE NOTE:
This article must be protected by a differential switch with IDn £ 30mA
l
Before any operation (cleaning – changing light bulbs – installing the luminaire) al ways disconnect the
l
power supply.
Before installing, check that the position chosen is compliant with requirements for safety distances under
l
the standards of the country where the product is to be installed.
The instruction sheet must be kept and made available to personnel entrusted with cleaning/maintenance
l
operations.
This article is suitable for indoor use only.
l
Connect the appliance to an efficient earth wire
l
If the wire and/or some other components are damaged, they must be immediately replaced with spare
l
parts.
This should be done only by specialized people,to ensure product safety. INDA disclaims any liability for
failure to comply with this obligation.
The junction box must be built recessed into the wall. It must be made of insulated material and have a lid
l
that closes completely. It also must have a protection level that is at least equal to that of the device.
This article can be independently connected to the lighting line and the user socket line, in agreement with
l
the regulations in force for electrical systems. Doubling the two systems solves the requirement in hotels
of enabling sockets only if explicitly requested by the customer.
Connect schuko plugs, whith a similar degree of protection class of the instrument.
l
Classification under EN 62471 'Exempt Group' for photo biological risks
l
This article must be used only if complete with protection screen.
l
Connect both the lamp and the power supply wires with a terminal strip E (2 poles 1,5mm min TA 25*
l
IP44) and place them in the junction box.
Disposal of Waste Electrical and Electronic
Equipment (WEEE) in the European Union.
This symbol appears on the product or on the packaging to indicate that the product must be collected
separately. Users must arrange for the disposal of worn out equipment by taking it to the proper collection
centre for recycling waste electrical and electronic equipment. Separate collection and recycling of worn out
equipment during the disposal process favours the conservation of natural resources and guarantees safe
disposal of said equipment protecting both the environment and human health. For more information on the
collection centres for worn out equipment, contact the sales outlet where the product was purchased.
CLEANING
Clean the mirror with clean water or a common mirror cleaner * and a soft sponge.
Apply water or detergent on the sponge, but not directly on the mirror,
The mirror edges should be cleaned esclusively with a soft sponge or dry soft cloth in order to avoid alteration
of the reflective surface.
Never use abrasive sponges and or detergents, or aggressive products containing: derivatives of hydrogen
chloride, fluorine, chlorine or ammonia (such as descaling products) acids, strong or alkaline bases.
Do not place any aggressive products / detergents such are those used for WC cleaning by the mirror .
* Follow the instructions on the detergent for mirrors or those of the detergent's manufacturer.
G
8
Publicidad
