Safety Instructions - Uniteck UNIFIX 150 B Manual Del Usuario

EN
UNIFIX 150B
PANEL COMPATABILITY
Thanks to its adaptive design, Unifix allows the fixing of different panels on the market.
Unifix 150B accepts 1 panel, with the panel spacing and dimensions as shown below.
Unifix 150B
RECOMMENDATIONS
Mount Unifix brackets only on surfaces with sufficient bearing capacity. Consider the additional load with
the panel:
Support
Unifix 150 B
Fastening: to prevent large quantities of snow from accumulating behind the sensor, install appropriate
barrier grids.
The position of the solar panel influences your electrical production. Choose the most optimal inclination
and orientation to suit your environment. Avoid shaded areas or objects that are a source of shadow (eg
tree)

SAFETY INSTRUCTIONS

•
Take the appropriate mesures to prevent accidents during your mounting steps.
• If the bracket and the mounting tools are exposed to sunlight for a long period, there is a risk
of getting burnt. Make sure to protect yourself accordingly.
• When finished, check and ensure that all of your brackets and panels are fixed properly
8/16
H (e)
Centre distance and panel dimensions
Spacers for fastening
Number of
panels
x1 L (e)
● Pas de maxi
= 2,5 kg Unisun 150.12M / 150.12BC
L (p)
L (e)
of each panel
(in mm)
H (e)
100 > 670 pas de maxi
Panels
www.uniteck.fr
H (p)
Panel Dimension
Max
L (p) H (p)
700
=9,8kg / 9,3kg
Total
weight
Of panels
(In Kg)
20